Network Management Quick Reference - Honeywell IFP-75 Installation & Operation Manual

Network Management

6.4 Network Management Quick Reference

Menu
Network Learn Network
Programing
Edit Network
Names
Edit Panel ID
Computer Access Computer Access
Access Codes
64
Options/Defaults
Guest or member Add or remove panels
into the network
Panel Names Network Panel ID
Site Names Edit Site Member
Change current
panel ID
*123456
Number
Computer Code *0
Select Profile Edit Name
(01 - 20)
Edit Access Code
Panel Functions
Table 6.3 Network Management Quick Reference List
IFP-75/IFP-75HV Installation/Operation Manual — P/N LS10147-001SK-E:D 06/25/2021
Network Management Quick Reference
See Section 6.2.1
Edit Panel Names See Section 6.2.2
Edit Site Names
See Appendix B for a list of
available characters and their
numeric designators. Section 6.2.3
See Section 6.2.4
Profile 1 is the profile that dictates
what functions the Firefighter Key
has access to. Because this is the
System Reset
profile for a keys, the user name and
System Silence
the Access Code can not be edited
System ACK
for this profile.
Fire Drill Key
Profile 2 is the profile for the Installer
System Tests
and is referred to as the "Installer
Fire Drill Menu
Code".
Indicator Test
This profile's user name and panel
Walk Test-No Report
functions can not be edited.
Walk Test-With Report See Section 6.2.5.
Communicator Test
Clear History Buffer
Point Functions
Disable/Enable Buffer
Point Status
Set SLC Device Address
SLC Single Device Locator
SLC Multi-Device Locator
I/O Point Control
Event History
Set Time & Date
Network Diagnostics
Comments