Table of Contents
Advertisement
3.5.3
Resetting the Device
The Reset Device is available to allow you to reset the device. The function
disconnects both the ethernet and serial connections.
The function also allows the device to save new configuration settings to flash
memory. Once a new setting is changed, you can use the Save function to accept the
changes. You will need to reset the device to save the settings to flash memory.
To reset the device:
1.
Right-click a desired device to display the settings menu.
2.
Select Reset Device.
The device resets. Once the process is complete, the device displays under the
Device List Area listing once again.
Figure 3.14 Reset Device
30
EKI-6233BN User Manual
Advertisement
Table of Contents
