Event; Figure 4.22 Alarm > Event - Advantech EKI-6233BN User Manual

Item
Read Community
Write Community
Contact
Location
Apply
4.6.2

Event

The Alarm Event page allows the selection of triggers for system, DCD and DSR
events for the alarm function.
To access this page, click Alarm > Event.
The following table describes the items in the previous figure.
Item
System Event
Cold Start
Warm Start
Authentication failure
IP address changed
Password changed
LAN Interface 1 link
down
Apply
EKI-6233BN User Manual
Description
Enter the read-only, public, community string.
Enter the write-only, private, community string.
Enter the individual designated the contact point for this event.
Enter the designated location/department of the setting.
Click Apply to save the values and update the screen.
Figure 4.22 Alarm > Event
Description
Click the option to select a warning type when the device's power
is cut off and reconnected.
Click the option to select a warning type when the device is reboot.
Click the option to select a warning type when an incorrect
password is entered.
Click the option to select a warning type when the IP address is
changed.
Click the option to select a warning type when the password is
changed.
Click the option to select a warning type when the LAN Interface 1
port is disconnected.
Click Apply to save the values and update the screen.
51