Overview; Accessing The Web Page; Accessing The Web Page Via Configuration Utility; Figure 4.1 Accessing The Web Page Via Configuration Utility - Advantech EKI-6233BN User Manual

4.1

Overview

EKI-6233BN device can be configured through a web interface. By using a standard
web browser, the same procedure as with the Windows configuration utility can be
used. In the browser's address field, enter the IP Address of your EKI-6233BN
device. The default IP setting is 10.0.0.1, but you should use the IP which you have
previously assigned for this device. Once the IP is entered, you will be presented with
the following windows.
Note!
Before using the web-based configuration, make sure your host PC
Ethernet network IP domain is as same as the device, or it can establish
the TCP connection with the device.
Note! It is recommended that you use Microsoft Internet Explorer 7.0 or
higher.
4.2

Accessing the Web Page

4.2.1

Accessing the Web Page via Configuration Utility

To access the web page via configuration utility:
1. Select Ethernet under the desired device.
2. Click Launch Browser.

Figure 4.1 Accessing the Web Page via Configuration Utility

34 EKI-6233BN User Manual