Table of Contents
Advertisement
Value 0 : None Setting.
Usage: mvcom [nn|all] bychar [NULL|]
Set datapackage as character(HEX).
Value 0 : None Setting.
5.3.5
mctrl
Usage: mctrl
Show all serial ports mode and related information.
Usage: mctrl [nn|all]
Set the "nn"
Usage: mctrl [nn|all] idleto [] guardt [] hangchr []
Set the "nn"
5.3.6
mdata
Usage: mdata
Show all serial ports mode and related information.
Usage: mdata [nn|all]
Set the "nn"
Usage: mdata [nn|all] protocol [TCP|UDP]
Set the "nn"
Usage: mdata [nn|all] idleto [] lsport [] atport []
Set the "nn"
port.
Usage: mdata [nn|all] respto [] framebk []
Set the "nn"
Usage: mdata [nn|all] peernum [1-16] peer [d.d.d.d:d] ...
Set the peer IP address and port for receive data.
Usage: mdata [nn|all] bysize [] bytime [] bychar [NULL|] bychartimeout [ON|OFF]
Set datapackage as size(bytes) or time(ms) or character(HEX) and
charactertime out.
Value 0 : None Setting.
Usage: mdata [nn|all] autopeerip [ON|OFF]
Set auto connect to peer ip as on or off.
5.3.7
net
Usage: net [1|2]
Show the first or second Ethernet port status and information.
Usage: net [1|2] mode [static|dhcp|boot|all]
Set the network operating mode.
Usage: net [1|2] ip [d.d.d.d] netmask [d.d.d.d] gw [d.d.d.d]
Set IP address, subnet mask, and default gateway.
Usage: net [1|2] dns [auto|specific]
Enable/Disable DNS.
Usage: net [1|2] dns1 [d.d.d.d]
Set network DNS1.
EKI-6233BN User Manual
th
or all serial ports as the control mode.
th
or all serial ports data idle timeout, guard time and hang character.
th
or all serial ports as the data mode.
th
or all serial ports' transmit protocol as TCP or UDP.
th
or all serial ports data idle timeout, listen port, and AT command
th
or all serial ports response timeout and frame break.
63
Advertisement
Table of Contents
