Table of Contents
Advertisement
2.6.2
Removable 2.5" Storage Device Installation
1.
It is recommended to use 2.5" SATA solid state device on the removable bay.
2.
Open the front CF/HDD door by loosening the door screw.
3.
Attach the 2.5" SATA storage device to the loader with 4 HDD mounting screws
4.
Slide HDD loader along the rails to the end and fix the lever screw. Re-fix the
front CF/HDD door.
Figure 2.20 Removable 2.5" Storage Device Installation
2.7
PCI card installation
1.
Remove the 4 bottom screws and the bottom cover.
2.
Remove the riser card module.
3.
Insert the PCI extension card into the PCI slot of the riser card module.
4.
Replace the riser card module.
5.
Reassemble the bottom cover.
1
Figure 2.21 PCI Card Installation
19
2
ARK-3440 User Manual
Advertisement
Table of Contents
