Error Messages 1. Error Messages In Numerical Order - Intermec EasyCoder 301 Programmer's Manual

Error Messages
1. Error Messages
in Numerical
Order
Intermec EasyCoder 301 Direct Protocol 2.0 – Programmer's Guide Ed. 3
Code Description
0 No error
1 Syntax error.
2 Unbalanced parenthesis.
3 Feature not implemented.
5 Unrecognized token.
9 Undefined token.
12 Type mismatch.
15 Font not found.
17 Bar code type not implemented.
18 Disk full.
19 Error in file name.
24 Overflow in temporary string buffer.
25 Wrong number of parameters.
26 Parameter too large.
27 Parameter too small.
30 Assign to a read-only variable.
34 File is not open.
37 Cutter device not found.
38 User break.
41 Parameter out of range.
43 Memory overflow.
58 Field overflow.
67 Error from communication channel.
78 Not allowed in execution mode.
79 Not allowed in a layout.
1001 Not implemented.
1003 Field out of label.
1005 Out of paper.
1009 Invalid parameter.
1010 Hardware error.
1011 I/O error.
1013 Device not found.
1015 File is read-only.
1018 Bad file descriptor.
1019 Invalid font.
1022 Head lifted.
1023 Incomplete label.
1025 File does not exist.
Chapter 12
102