Intermec EasyCoder 301 Programmer's Manual page 19

2. General
Formatting
Commands,
cont'd.
Intermec EasyCoder 301 Direct Protocol 2.0 – Programmer's Guide Ed. 3
Direction
Intermec Direct Protocol allows printing in four directions. You
can rotate the printable object clockwise around the anchor point/
insertion point with a 90 increment (0 , 90 , 180 , or 270 ) by
means of a DIR command:
DIR <direction>
<direction>
Default:
Reset to default by: PRINTFEED|PF
Example:
DIR 3
DIR rotates all following printable fields so that they are printed
across the paper web and upside down with respect to the way the
paper is fed out of the printer.
This illustration summarizes the three general formatting commands
PRPOS|PP, ALIGN|AN and DIR:
Chapter 4
is a number from 1 – 4 (DIR 1 = 0 ; DIR 2 =
90 ; DIR 3 = 180 ; DIR 4 = 270 )
1
Label Design
18