Intermec EasyCoder 301 Programmer's Manual page 28

4. Bar Code Field,
cont'd.
Intermec EasyCoder 301 Direct Protocol 2.0 – Programmer's Guide Ed. 3
Bar code interpretation printing can be enabled or disabled by means
of these commands:
BARFONT | BF ON
BARFONT | BF OFF
By default, bar code interpretation printing is disabled.
Summary
To create a bar code field, the following formatting commands must
be given (in most cases default values may substitute missing pa-
rameters). Input data and printing commands are explained in chap-
ters 4.9 and 5.2 respectively.
Purpose Command
X/Y Position PRPOS | PP)
Alignment ALIGN | AN
Direction DIR
Bar Code Select BARSET
Human Readable BF ON
Examples:
PP 100,100:AN 7:DIR 4:BARSET "CODE39",2,1,3,120:
BF "Swiss 721 Bold BT"20,0,5,1,1 ON
PP 100,100:AN 7:DIR 4:BARSET "CODE39",2,1,3,120:
NASC "OCR-A.NSC":
BF "OCR-A BT",20,0,5,1,1 ON:NASC 1
Chapter 4 Label Design
Default Remarks
0,0 Number of dots
1 Select ALIGN 1 – 9
1 Select DIR 1 – 4
see above Can be replaced
by BT, BH, BR, BM
Off Can be omitted
27