Intermec EasyCoder 301 Programmer's Manual page 21

3. Text Field,
cont'd.
1
/. Since the height of these fonts
were specified in dots, not points,
the point sizes in the table indicate
the nearest value expressed as a
whole number (integer) of points
and is thus not 100% correct.
Intermec EasyCoder 301 Direct Protocol 2.0 – Programmer's Guide Ed. 3
The three font parameters can be specified separately using the fol-
lowing commands:
FONT | FT "<font file name>"
FONTSIZE | FS <font size>
FONTSLANT | FL <font slant>
For each parameter, the value specified by these commands will be
used in all text fields on the current label, until a new value is speci-
fied.
Standard EasyCoder 301 printers contain the following 15 font files:
• Century Schoolbook BT
• Dutch 801 Roman BT
• Dutch 801 Bold BT
• Futura Light BT
• Letter Gothic 12 Pitch BT
• Monospace 821 BT
• Monospace 821 Bold BT
• OCR-A BT
• OCR-B 10 Pitch BT
• Prestige 12 Pitch Bold BT
• Swiss 721 BT (default font)
• Swiss 721 Bold BT
• Swiss 721 Bold Condensed BT
• Zapf Dingbats BT
• Zurich Extra Condensed BT
For examples of the above fonts, see chapter 11.2.
Previous EasyCoder printers contained bitmapped fonts, i.e. fonts
scaled with a fixed size and slant
ibility, the EasyCoder 301 provides FONT commands to select the
equivalent combinations of font file name, size and slant:
"Old" EasyCoders EasyCoder 301
"SW020BSN" "Swiss 721 Bold BT",6,0
"SW030RSN" "Swiss 721 BT",9,0
"SW050RSN" "Swiss 721 BT",14,0
"SW060BSN" "Swiss 721 Bold BT",17,0
"SW080BSN" "Swiss 721 Bold BT",23,0
"SW120BSN" "Swiss 721 Bold BT",34,0
"MS030RMN" "Monospace 821 BT",9,0
"MS050RMN" "Monospace 821 BT",14,0
"MS060BMN" "Monospace 821 Bold BT",17,0
"OB035RM1" "OCR-A BT",8,0
Chapter 4 Label Design
(use NASC "OCR-A.NSC)
(use NASC "OCR-B.NSC)
(use NASC "ZAPF.NSC)
1
. To provide backward compat-
20