Commands And 1. Commands (Alphabetical) - Intermec EasyCoder 301 Programmer's Manual

Commands and Functions
1. Commands (Alphabetical)
Instruction
ALIGN (AN)
BARFONT (BF)
BARFONT (BF) ON/OFF
BARFONTD (BFD)
BARFONTDSIZE (BFSD)
BARFONTDSLANT (BFLD) 9.2
BARFONTSIZE (BFS)
BARFONTSLANT (BFL)
BARHEIGHT (BH)
BARMAG (BM)
BARRATIO (BR)
BARSET
BARTYPE (BT)
BREAK
BREAK ON/OFF
CHR$ (n)
CLEANFEED
Intermec EasyCoder 301 Direct Protocol 2.0 – Programmer's Guide Ed. 3
Chapter Purpose
4.2 Specifies which part of a text, bar code field, image field, line
or box will be positioned at the insertion point.
4.4 Specifies a single-byte character set font for printing human
readable bar code interpretation. The settings are: start parameter;
font name; font size in points; character slant in degrees, with
positive values slanting the characters to the right; vertical
offset between the barcode and the interpretation; width
magnification; height magnification; enable/disable the printing
of barcode interpretations.
4.4 Enables/disables the printing of bar code interpretations.
9.2 Specifies a double-byte character set font for printing human
readable bar code interpretation. The settings are: font name;
font size in points; character slant in degrees.
9.2 Specifies the font size of a double-byte character set in points
for printing human readable bar code interpretation.
Specifies the slant of a double-byte character set font in degrees
for printing human readable bar code interpretation.
9.2 Specifies the font size for a single-byte character set font in
points for printing human readable bar code interpretation.
9.2 Specifies the slant of a single-byte character set font in degrees
for printing human readable bar code interpretation.
4.4 Specifies the height of a bar code in dots.
4.4 Specifies the magnification with regard to the width of the bars
in a bar code.
4.4 Specifies the width ratio between wide and narrow bars in a bar
code.
4.4, 9.1 Specifies a bar code type and sets parameters for complex bar
codes
4.4 Specifies the type of bar code.
6.16 Specifies a break interrupt character separately for the parallel
and serial communication channels.
6.16 Enables/disables break interrupt separately for the parallel and
serial communication channels.
9.2 Returns the ASCII character whose number is given in the
brackets.
5.1 Runs the printer's feed mechanism, for the distance specified
in dots to allow cleaning.
Chapter 13
104