Intermec EasyCoder 301 Programmer's Manual page 25

4. Bar Code Field,
cont'd.
Intermec EasyCoder 301 Direct Protocol 2.0 – Programmer's Guide Ed. 3
Bar Code
Interleaved 2 of 5
Interleaved 2 of 5 w. checksum
Interleaved 2 of 5 A
Matrix 2 of 5
Maxicode
MSI (modified Plessey)
PDF 417
Plessey
Postnet
Straight 2 of 5
Two-Character Supplemental Code
UCC-128 Serial Shipping Container Code "UCC128"
UPC-5 digits Add-On Code
UPC-B
UPC-A
UPC-D1
UPC-D2
UPC-D3
UPC-D4
UPC-D5
UPC-E
UPC Shipping Container Code
See also chapter 9.1.
Set Bar Code Height
The height of the bars that make up the bar code can be specified by
means of the BARHEIGHT command.
BARHEIGHT | BH <height>
<height>
Default:
Reset to default by: PRINTFEED|PF
Set Bar Code Ratio
The ratio between the wide and the narrow bars can be set using a
BARRATIO command.
BARRATIO | BR <wide bars>,<narrow bars>
<wide bars>
<narrow bars>
Default:
Reset to default by: PRINTFEED|PF
Chapter 4
the height of the bars in dots
100
width of wide bars in dots
width of narrow bars in dots
3:1
Label Design
Abbreviation
"INT2OF5"
"INT2OF5C"
"I2OF5A"
"C2OF5MAT"
"MAXICODE"
"MSI"
"PDF417"
"PLESSEY"
"POSTNET"
"C2OF5"
"ADDON2"
"SCCADDON"
"UPCB"
"UPCA"
"UPCD1"
"UPCD2"
"UPCD3"
"UPCD4"
"UPCD5"
"UPCE"
"UPCSCC"
24