Setting Up Bluetooth Communications - Intermec CK32 User Manual

Setting Up Bluetooth Communications

CK32 I-Safe Handheld Computer User's Manual
5 If required for your network, you may also need to set these
parameters on each CK32 I-Safe:
• Primary and secondary DNS servers
• Primary and secondary WINS servers
6 Make sure your CK32 I-Safe is talking to the network and
that the network can see your CK32 I-Safe.
To check the status of your Ethernet connect on
1 Tap the iConnect icon (
Today screen.
2 From the menu, select Status > Ethernet. The Ethernet
Status screen appears and checks the connection.
You can also use iConnect to configure the network settings if
you need to change any setting. Tap Tools > Ethernet IP
Settings from the iConnect menu.
You can send information to a Bluetooth device wirelessly using
the standard Bluetooth radio in the CK32 I-Safe. The Bluetooth
technology uses short-range radio links and allows for
communications over a 10-meter (32.8 foot) range.
You can use the Bluetooth radio to connect to wireless devices
including:
• Scanners
• Printers
• Headsets
Chapter 3 — Configuring the CK32 I-Safe
) in the lower right corner of the
43