Intermec CK32 User Manual page 83

CK32 I-Safe Handheld Computer User's Manual
2 Make sure you have configured the communications and
radio parameters on your CK32 I-Safe.
3 Make sure you have selected Funk as your security choice.
4 Choose Communications > 802.11 Radio > Funk Security
> Profile.
5 For Association, choose Open.
6 For Encryption, choose WEP.
7 For Inner Authentication, choose TTLS, PEAP or TLS.
If you choose TTLS or PEAP:
a Select User name and type your user name.
b Select Password prompt, and choose Enter password
now.
Note: You can use Prompt for password to troubleshoot your
connection to the network if you have problems.
c Select User Password and type a user password.
d For Validate Server Certificate, choose Enabled.
If you choose TLS:
a Load a user and root certificate on your CK32 I-Safe. For
help, see "Loading a Certificate" on page 80.
b For Validate Server Certificate, choose Yes.
c You must enter a User Name and Subject Name. You can
also enter a Server Common Name if you want to
increase your level of security.
8 Save your settings.
Conf gur ng EAP Secur ty on the CK32 I-Safe
1 Open Intermec Settings.
1 Make sure you have selected Funk as your security choice.
2 Make sure you have configured the communications
parameters and selected Funk as your security choice.
Chapter 3 — Configuring the CK32 I-Safe
67