Intermec CK32 User Manual page 33

Understanding the CK32 I-Safe Status Lights
Light Name
Keyboard Status lights
Battery
Good Read
Ready-to-Work™ indicator
CK32 I-Safe Handheld Computer User's Manual
Chapter 1 — Using the CK32 I-Safe Handheld Computer
Description
The left keyboard status light (
the overlay is selected. The right keyboard status light
C
( ) indicates the green plane of the overlay is selected.
Light Status What It Means
Off The battery is charged.
Blinking Red The battery blinks when the charge is low.
Continued use causes the CK32 I-Safe to enter
Suspend mode. You may also experience a
blinking low battery light when the battery is
low and you attempt to take the CK32 I-Safe
out of Suspend mode. This is normal and
indicates the battery needs to be charged
before you use the computer.
This green light indicates when the CK32 I-Safe successfully
decodes a bar code.
This blue light indicates when the CK32 I-Safe is ready to use in
your application, typically TE 2000. If you have problems using
TE 2000, see the TE 2000 Terminal Emulation Programmer's
Guide (P/N 977-055-xxx).
Light Status What It Means
Off The TE 2000 application has not loaded
successfully, or you are not running a Ready-
to-Work application.
Blinking The CK32 I-Safe is not connected to the host.
On A connection to the server has been established
and all network connections are active.
B
) indicates the orange plane of
17