Performing A Clean Boot; Cleaning The Scanner Window, Screen, And Computer; Cleaning The Scanner Window And Screen - Intermec CK32 User Manual

Performing a Clean Boot

Cleaning the Scanner Window, Screen, and Computer

Cleaning the Scanner Window and Screen

CK32 I-Safe Handheld Computer User's Manual
Chapter 5— Troubleshooting and Maintenance
If performing either reset method fails to restore system
operation, you may have to perform a clean boot. This is a boot
method which formats the Object Store (user store) to clean data
and registry information from the CK32 I-Safe system and
restore them to their factory-default state.
The clean boot process will erase the memory in the CK32 I-
Safe, including all applications and data files found in the
object store.
To preserve application programs through a clean boot they
must be stored in the Flash File Store.
To perform a clean boot
1 Press the Power button to suspend the CK32 I-Safe.
2 With a bent paper clip or similar device, press the recessed
reset switch on the CK32 I-Safe keypad.
3 Press and hold the Power button until a Warning message
appears on the display, release the Power button, then read
the message.
4 Press and release the right side of the Scan button to perform
a clean boot. Press and release the left side of the Scan button
to cancel the clean boot.
To keep the computer in good working order, you may need to
perform these minor maintenance tasks:
• clean the scanner window
• clean the screen
• clean the computer housing and handle
Clean the scanner window and screen as often as needed for the
environment in which you are using the computer.
115