Configuring Security On The Ck32 I-Safe - Intermec CK32 User Manual

Chapter 3 — Configuring the CK32 I-Safe

Configuring Security on the CK32 I-Safe

60
The debug output file is then stored in the "\My Device" root
folder as a text file called "uroddsvc." Using File Explorer,
press and hold your stylus on this file for its pop-up menu,
then select any of its options to copy, beam, send, or delete
this file.
The CK32 I-Safe provides three types of security for your wireless
network:
• Wi-Fi Protected Access (WPA)
• 802.1x
• WEP
This section explains how to configure security on your wireless
CK32 I-Safe. If you choose not to use security, see
Security" on page 83.
implement security.
You must use either Funk or Microsoft security to implement
your security solution. For details, see
and Microsoft Security" on page 64.
CK32 I-Safe Handheld Computer User's Manual
Intermec always recommends that you
"Choosing Between Funk
"Disabling