Intermec CK32 User Manual page 58

Chapter 3 — Configuring the CK32 I-Safe
42
Intrinsically Safe rules prohibit direct connection to the CK32
I-Safe.
To use the CK32 I-Safe n an Ethernet network
1 Tap the iConnect icon (
Today screen.From the menu, select Enable > Ethernet. This
change disables 802.11 networking on the CK32 I-Safe.
2 You will be prompted to reboot the device for changes to take
affect. Press and hold the Power button for 10 seconds to
initiate the reboot. Do not use the Reset button. See
"Preferred Reset Method" on
3 Go to Start > Settings > the System tab > Intermec Settings
> Communications > Ethernet Adapter > IP Settings.
4 If you have a DHCP server, enable DHCP.
or
If you do not have a DHCP server, set these parameters:
• IP address
• Subnet mask
• Default router
CK32 I-Safe Handheld Computer User's Manual
) in the lower right corner of the
page 114 for more information.