Water Pipes Usage For Cleaning Purposes; Cleaning Of Parts That Come In Contact With The Mixture Of The Ice Cream - Valmar SWEETY 60 TTi Handling, Operating And Maintenance Manual

13.3 WATER PIPES USAGE FOR CLEANING PURPOSES

For cleaning the basin or outlet pipe washing you can use the water pipes that
are installed into the appliance itself. The upper pipe that is installed in the
upper part of the basin is meant for washing or adding water into the basin.
Lower pipe, which is installed in the lower part allow us to wash the outlet pipe,
but not to clean it in the apropriate way.
The pipes have to be conected to the drinkable water inlet (Check
appliance conection). The pipes are controled by keys on the electric control
board. (Check electric control board).
UPPER WATER
PIPE
13.4 CLEANING OF PARTS THAT COME IN CONTACT WITH
THE MIXTURE OF THE ICE CREAM
All parts, which come into contact with ice cream mixture, must be cleaned
before and after every use.
With regular cleaning practice you comply with standards of hygiene and ensure
ice cream mixture treating quality!
13.4.1 CLEANING OF CYLINDER (ICE CREAM )
Cleaning process:
make sure that the mixture treating control panel is in STOP state;
make sure that the ejection opening is well closed;
by double pressing the desired temperature key allow water inflow into
the basin (30 cm of water);
Press the mixing key and pay attention on the mixer;
Press STOP / RESET key;
turn off the SAFETY SWITCH and the MAIN SWITCH;
place a suitable container under the ejection opening;
open the outlet pipe and empty the water from the basin;
disassemble the basin cover:
61
LOWER
WATER PIPE