Cleaning The Surfaces Of The Appliance - Valmar SWEETY 60 TTi Handling, Operating And Maintenance Manual

All warning labels on the appliance must be replaced with new ones when they
begin to fade or if they become damaged.
Before cleaning the appliance, the operator must make sure that the appliance
is not under maintenance, in service or in cleaning. At the end of the shift, the
operator working on the next shift or the person who will continue to operate the
appliance must be informed of the current state of the appliance.
Before cleaning the appliance, the operator must make sure that the floor is free
of any oil smudges or other slippery substances or objects which might cause a
person to slip or trip over.
Operators must make sure before cleaning the appliance that the side panels
and the top cover of the appliance are securely fitted to the main construction
and that there are no parts or objects on the appliance or in the cylinder that
could damage the appliance during its operation.
In the event of dangerous situations (e.g. blocked mixer), which could harm the
operator's or another person's well being, switching off the MAIN SWITCH must
immediately shut down the appliance.
The side panels and the top cover, as well as safety devices and protective
covers, must not be taken off during the cleaning (during SLOW MIXING) of the
appliance.
When the cover (basin) is open and the machine still running and on display not
show Er Door... the appliance must be immediately stopped and shut down and
hang a sign onto the appliance which says that the machine is out of order. An
authorized technician must be informed as soon as possible in order to get the
appliance repaired.
During the cleaning (during SLOW MIXING) of the appliance, attention must be
paid to any oil leaks, increased noise, squeaking sounds or increased
vibrations. In such a case, the appliance must be immediately shut down; a
visible notice board must be placed on it with information that it is inoperable
and authorized service personnel must be notified as soon as possible.
Every day before using the appliance, the correct functioning of the safety
switch of the lid (basin) must be checked. When the appliance is in mixing
(press the button) phase open the cover. On the touch screen in tutor
message must show caption Er Door... and the mixing is interrupted.

13.2 CLEANING THE SURFACES OF THE APPLIANCE

Surface cleaning includes cleaning of the side pannels of the machine and other
external parts of the machine that are not in contact with the ice cream mix.
It is strictly forbiden to use abrasive pads or aggressive cleaning agents,
which can damage the surfaces.
Cleaning process:
turn off the SAFETY SWITCH and the MAIN SWITCH
ensure that the cover lid and outlet pipe are properly closed.
clean the surfaces and make sure that the detergent does not touch
those parts, which do come into contact with ice cream mixture.
60