Valmar SWEETY 60 TTi Handling, Operating And Maintenance Manual page 33

3. Use the UP / DOWN arrows
scroll the list of available programs.
Select the desired program by pressing the
relevant button (e.g. 08). When pressed,
the button changes color and becomes
black.
4. Press the button to start the machine.
The end of the cycle is notified by a beep
and a light signal (if any). A message is
displayed to take out the ice cream. The
machine will keep ice cream consistency
automatically until extraction, i.e. until the
end of the maximum time limit.
5. Active program screen.
7.2.1.2 Key CONTINUOUS MIXING
The CONTINUOUS MIXING
compressor OFF in trough the selected program. This low mixing you can use
for:
mix mixtures in the cylinder,
rinse the cylinder,
wash the cylinder at the end of production.
1. Press the button to start a low
continuos mixing – pre-set program 00.
2. The machine starts with speed 4 for
unlimited time. This program permitted
changing of the mixer speed and of the
time.
With STOP button
to
button activate the low mixing with the
you can stop mixing (in any phase).
33