Transportation And Placing Of The Appliance; Instructions For Preventing Injuries; Unloading The Appliance From The Lorry - Valmar SWEETY 60 TTi Handling, Operating And Maintenance Manual

3 TRANSPORTATION AND PLACING OF THE
APPLIANCE

3.1 INSTRUCTIONS FOR PREVENTING INJURIES

Pay due attention to legally required safety measures.
At work wear suitable clothing. Do not wear ties, jeweller's chains or belts,
which could get caught in the machine.
Do not shift or dislocate the safety switches or protective parts.
Make sure that the lifting device is in good condition and that its load capacity
exceeds the weight of the appliance (refer to the technical specifications data
sheet).
Lift the appliance following the instructions for its use and maintenance. Pay
attention to the handling and handgrip locations. The use of a suitable lifting
device is recommended.
While lifting or moving the appliance do not stand under the machine.
Do not turn the appliance after holding the cables or the water hose has lifted it.
If you have to attend to any work higher up above the appliance, you should use
a suitable ladder and not the appliance for support.

3.2 UNLOADING THE APPLIANCE FROM THE LORRY

Required devices are a hand lift for pallets and a forklift truck with load capacity
of at least 1,200 kg.
Lift the crate containing the appliance using the hydraulic palette lift and move it
as close to the open side of the lorry as possible.
Remove the hand lift from underneath and handle the crate with the forklift
truck. Make sure that the weight is focused on the holding points.
Remove the crate from the lorry with the forklift truck in reverse gear as soon as
the crate is moved out of the lorry, and lower the crate to the minimal height of
around 30 cm.
Slowly and carefully place the box containing the appliance in its place. To
move the appliance around on the premises use wheels, which are supplied
with the appliance.
10