Valmar SWEETY 60 TTi Handling, Operating And Maintenance Manual page 32

The START CYCLE button
(except when first using the machine).
1. Press the button
NEW program or the LAST program used.
2. Press START CYCLE
program (NEW or LAST).
3. Active program screen.
To change the program set to the START CYCLE button
button to change the program set to the START CYCLE button. Automatic switch to the
program screen. Enter one of the menu icons and select the desired program. For further
information see the chapter Shortcut to program start)
All menu programs are started with the START CYCLE button
The end of the cycle is notified by a beep and a light signal (if any). A message
is displayed to take out the ice cream. Should the operator not take out the ice
cream after the notice, the machine will keep ice cream consistency
automatically until extraction, i.e. until the end of the maximum time limit.
7.2.1.1.2 START with the START CYCLE BUTTON from the MENU
1. Press the button
NEW program or the LAST program used.
2. Select one of the icons representing the
various menus to enter the list of available
programs.
is always set to one of the menu programs
to display the set
again to start the
to display the set
32
(tips: Press the
.