Water Pipes Usage For Cleaning Purposes; Cleaning Of Parts That Come In Contact With The Ice Cream - Valmar Sweety Quick 60 Operating And Maintenance Manual

11.3 WATER PIPES USAGE FOR CLEANING PURPOSES

For cleaning the basin or outlet pipe washing you can use the water pipes that are
installed into the appliance itself. The upper pipe that is installed in the upper part
of the basin is meant for washing or adding water into the basin.
Lower pipe, which is installed in the lower part allow us to wash the outlet pipe, but
not to clean it in the appropriate way.
The pipes have to be connected to the drinkable water inlet (Check appliance
connection). The pipes are controlled by keys on the electric control board. (Check
electric control board).
UPPER WATER
PIPE
11.4 CLEANING OF PARTS THAT COME IN CONTACT WITH THE
ICE CREAM
All parts, which come into contact with ice cream mixture, must be cleaned before
and after every use. With regular cleaning practice you comply with standards
of hygiene and ensure ice cream mixture treating quality.
Cleaning process:
make sure that the mixture treating control panel is in STOP state;
make sure that the ejection opening is well closed;
by double pressing the desired temperature key allow water inflow into the
basin (30 cm of water);
Press the mixing key and pay attention on the mixer;
Press STOP / RESET key;
turn off the SAFETY SWITCH and the MAIN SWITCH;
place a suitable container under the ejection opening;
open the outlet pipe and empty the water from the basin;
disassemble the cylinder cover:
32
LOWER
WATER PIPE