Outlet Of Ice-Cream Mixture; Before Appliance Usage - Valmar SWEETY 60 TTi Handling, Operating And Maintenance Manual

The outlet valve closes by pushing the handle fully forward and turning it in the
clockwise direction.
DRAIN OUTLET

12.5 OUTLET OF ICE-CREAM MIXTURE

Proces of outlet of mixture into a pot (
:
out the hot mixture!)
Place a container under the drain outlet;
Open outlet pipe;
Control the outlet of ice-cream mixture;
Close the outlet pipe.

12.6 BEFORE APPLIANCE USAGE

Before using the appliance you should:
Check that the surroundings of the appliance are not wet or slipery;
Check that the water gauge inlet is opened;
Check that the FUSES are inserted and protected;
Check that the MAIN SWITCH is turned on;
Check that the basin is properly cleaned;
Check that the basin is properly disinfected;
Check that there are no other items or tools left in the production basin
Just a cleaned and desinfected appliance can be used for mass
preparation. To get optimal results it is needed to have proper quantity and
proper quality of the mixture.
The amount of the mixture shall conform to the technical characteristics of the
machine. During preparation and loading it is needed to comply with the
minimum and maximum mixture ammounts in the basin. They are reported in
below table:
Appliance type
SWEETY quick/quick-i 60
SWEETY quick/quick-i 130
SWEETY quick/quick-i 180
All performance data is based on standard ice cream mixture production. When
producing mixtures, which include ingredients or additives that increase in
volume during heating and/or cooking, the maximum mixture quantity must be
reduced in accordance with the recipe.
Be careful not to burn yourself while pouring
min.quantity (kg) max.quantity (kg) Optimal quantity (kg)
20
30
60
58
OUTLET PIPE HANDLE
60 50
130 110
180 160