Valmar SWEETY 60 TTi Handling, Operating And Maintenance Manual page 65

take off and inspect he piston seal, the locknut washer and the valve
washer: if the washer or seal is cracked, worn or has lost elasticity, it
must be replaced with a new one;
mixer, blockader, both sliders, all parts of the outlet valve, all washers
and seals must be cleaned in warm water and left to dry.
It is strictly forbidden to put plastic parts of the appliance into the dishwasher to
clean them!
When cleaning the mixer use the brush that is supplied with the appliance.
CLEANING BRUSH
it is recommended that rubber seals are greased with Vaseline
insert the plastic insert – sleeve into the mixer (option):
Roll the plastic sheet – busch to form a kind of bush.
Insert the plastic insert – sleeve into the mixer. Use your fingers to push it
completely into a hole in a manner to make it fit perfectly to the mixer.
65