Operating The Appliance - Valmar SWEETY 60 TTi Handling, Operating And Maintenance Manual

A test start-up of the appliance is carried out by an appropriately trained
electrician who has also connected the machine so as to make sure that it is
properly connected (see the section on MAINTENANCE).
If the appliance is correctly connected to the mains the mixer in the production
cylinder should be turning in counter clockwise direction.
Production basin r mixer, installed in appliances with built-in inverter, will rotate
in the correct direction regardless of the connecting position of either of the
phases.
After connecting the appliance to the electricity network, appropriately trained
electrician must also control the power consumption. The current must not
exceed the maximum allowed on the identification plate or sticker (see the
section GENERAL FEATURES AND SPECIFICATIONS).

6 OPERATING THE APPLIANCE

The user operates the appliance standing in front of appliance. This position
allows user to handle the control panel and the safety switch.
The appliance must be always under users control during operation.
CONTROL BOARD
SAFETY SWITCH
The control panel is used to display the status or the operation phase the
machine is in, to perform settings and to show messages and errors while
producing ice cream.
The safety switch is used to safely and securely switch of the electronics. The
electronics is switched off by pressing down the switch-off key in the normal
position and then depressing it. The switch will normally remain down and must
be pulled back up by hand to return to its normal position.
The water pipe is used for cleaning of the appliance.
16