Cleaning The Surfaces - Valmar Sweety Quick 60 Operating And Maintenance Manual

Sweety quick series
Table of Contents

Advertisement

Before cleaning the appliance, the operator must make sure that the floor is free of
any oil smudges or other slippery substances or objects which might cause a
person to slip or trip over.
Operators must make sure before cleaning the appliance that the side panels and
the top cover of the appliance are securely fitted to the main construction and that
there are no parts or objects on the appliance or in the cylinder that could damage
the appliance during its operation.
In the event of dangerous situations (e.g. blocked mixer), which could harm the
operator's or another person's well being, switching off the MAIN SWITCH must
immediately shut down the appliance.
The side panels and the top cover, as well as safety devices and protective
covers, must not be taken off during the cleaning (during SLOW MIXING) of the
appliance.
It is forbidden to get onto the appliance and walk upon it during its cleaning.
During the cleaning (during SLOW MIXING) of the appliance, attention must be
paid to any oil leaks, increased noise, squeaking sounds or increased vibrations.
In such a case, the appliance must be immediately shut down; a visible notice
board must be placed on it with information that it is inoperable and authorized
service personnel must be notified as soon as possible
Each day before using the machine it is mandatory to verify the operation of
the safety switches on the door. When the machine is in standby mode (on
the screen it shown OFF) lift the basin cover lid. On the screen it should
appear DOOR. Then (with the cover lid opened), press MIXING MODE key,
the appliance must NOT START.

11.2 CLEANING THE SURFACES

Surface cleaning includes cleaning of the side panels of the machine and other
external parts of the machine that are not in contact with the ice cream mix.
It is strictly forbidden to use abrasive pads or aggressive cleaning agents,
which can damage the surfaces.
Cleaning process:
turn off the SAFETY SWITCH and the MAIN SWITCH;
ensure that the cover lid and outlet pipe are properly closed;
clean the surfaces and make sure that the detergent does not touch those
parts, which do come into contact with ice cream mixture.
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents