Temperature Sensor; Maintenance - LEAB Champ User Manual

LEAB Automotive GmbH
1. Connect the mains plug to a 115 V mains supply.
ð Charging starts automatically, the yellow LED of the charge status indic-
ator lights up.
ð If the charging current is 15% below the maximum value, the yellow and
green LEDs of the charging status indicator light up.
ð When the battery is fully charged, the green LED on the charging status
indicator lights up and indicates the trickle charge.
ð The battery is charged.

9.4 Temperature sensor

Depending on the model, the Champ charger has a temperature sensor loc-
ated in the negative lead. The temperature sensor corrects the charging
voltage as a function of the temperature in order to provide an optimal, ef-
fective and gentle battery charge.

10 Maintenance

Check the device as follows before using it each time:
– Check the mains cable and mains plug for damage.
– Check charging cables and connections for damage.
– Check the charger for external damage.
– Ensure that the wiring between the charging cable and the charger is se-
cure.
TIP
Battery maintenance
For battery maintenance, refer to the battery manufacturer's
instructions.
LEAB Automotive GmbH Thorshammer 6
10 Maintenance
24866 Busdorf 15