Otto Bock LP2-00 LP Symes Instructions For Use Manual page 12

► Report each serious incident related to the product to the manufacturer
and to the relevant authority in your country. This is particularly import­
ant when there is a decline in the health state.
► Please keep this document for your records.
1.1 Construction and Function
This document applies to the following products: LP2-00 LP Symes
The prosthetic foot has carbon spring elements. The heel stiffness can be
increased with a heel wedge.
1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.
2 Intended use
2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compon­
ents based upon weight and mobility grades identifiable by our MOBIS clas­
sification information and which have appropriate modular connectors.
The product is recommended for mobility grade 2 (restricted
outdoor walker) and mobility grade 3 (unrestricted outdoor walk­
m°
kg
er).
The table that follows shows the suitable spring stiffness of the prosthetic
foot, matching the patient's body weight and activity.
Spring stiffness relative to body weight and activity level
Body weight [kg]
44 to 52
53 to 59
60 to 68
69 to 77
78 to 88
89 to 100
101 to 116
117 to 130
12
Low Normal
1
1
2
3
4
5
6
7
High
1
2
3
4
5
6
7
8
2
3
4
5
6
7
8
9