Transitioning Power States - Xantrex XPLORE 120/12 Owner's Manual

Transitioning Power States

Transitioning Power States
Turn ON the XPLORE Charger:
Connect the batteries to the charger then connect AC
n
power at the source. The charger runs through a preset
charging cycle.
There is only ONE way to safely turn the XPLORE Charger
off (Disable):
1. Disconnect AC power at the source.
2. Disconnect all DC batteries.
38
ELECTRICAL SHOCK HAZARD
Do not disassemble the battery charger. Internal capacitors
n
remain charged for five minutes after all power is
disconnected.
Disconnect both AC and DC power from the battery charger
n
before attempting any maintenance or cleaning or working
on any circuits connected to the battery charger. See note
below.
Failure to follow these instructions will result in death or serious
injury.
XPLORE 120/12 Battery Charger Owner's Guide
DANGER