Otto Bock C-Leg Protector 4X860 Series Instructions For Use Manual page 12

Report each serious incident related to the product to the manufacturer and to the relevant
►
authority in your country. This is particularly important when there is a decline in the health
state.
Please keep this document for your records.
►
The product "4X860=* C-Leg Protective Cover" is referred to as the Protective Cover/product
below.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.
2 Product description
2.1 Design
The product consists of the following components:
2.2 Function
The protector provides a means of enclosing the C-Leg electronic knee joint, including the tube
adapter, to enhance its appearance and function. The housing of the knee joint is protected
against external influences by the protector, e. g. scratching and surface contamination. The pro­
tector is not required for the proper and safe functioning of the joint.
2.3 Combination possibilities
Prosthetic components that are suited for combination with the product are listed below.
Knee joints
• 3C98-3, 3C88-3 C-Leg
INFORMATION
The product is not compatible with the charger extension cable – 4X156 ankle, charger exten­
sion cable – 4X157 knee head and charger extension cable – 4X158 ankle long.
Prosthetic feet
• 1D10 Dynamic foot
• 1D11 Dynamic foot (women)
• 1C10 Terion
• Terion K2: 1C11
• 1A30 Greissinger plus
• 1C60 Triton
• 1C61 Triton Vertical Shock
12
1. Protector main unit
2. Upper closure (one side always stays on
the main unit)
3. Lengthwise closure
4. Protector Foot Cuff
5. Shield Insert
• 1C63 Triton Low Profile
• 1C64 Triton Heavy Duty
• Triton side flex: 1C68
• 1C30 Trias
• 1C40 C-Walk
• Taleo: 1C50
• Taleo Vertical Shock: 1C51