Table of Contents
Advertisement
18
Leg strap, chest strap
1) Open the hook-and-loop straps on the belts.
2) Loop the straps around the frame tube:
→ Pull the leg strap through between the side panels, underneath the seat bottom (see fig. 20).
→ Loop the chest strap round the outside of the back tubes (see fig. 43).
3) Fasten the hook-and-loop straps (leg strap example: see fig. 21).
20
7.9 Adjusting the seat belts
WARNING
Incorrect adjustment/application of the seat belts
Strangulation, suffocation due to failure to observe specifications
► Observe the information in the instructions for use included with the seat belt for correct adjustment/applica
tion.
► Always use the wheelchair in conjunction with correctly adjusted seat belts.
► Following the preliminary adjustment of the belt lengths, final adjustments have to be made in the presence of
the user.
► If a medically correct positioning cannot be achieved by means of the strap adjustment, the attachment points
and brackets must be correspondingly moved.
CAUTION
Lack of instruction
Injuries, malpositions, illness of the user due to incorrect information
► The qualified personnel is responsible for making sure that the user and/or attendant/nursing staff has under
stood the proper adjustment, use, maintenance and care of the belt system.
► In particular, ensure that the user and/or attendant/care staff knows how to quickly loosen and open the
product to avoid delays in case of emergency.
Information on the settings can be found in the manufacturer's instructions for use accompanying each product.
Invader 480S26=20000_K
Settings and assembly instructions
19
21
19
Advertisement
Table of Contents
