Advertisement
Available languages
Available languages
Therefore, keeping a minimum distance of 30 cm to HF communication devices is recom
►
mended.
NOTICE
Penetration of dirt and humidity into the product
Limited function due to product malfunction or damage.
Ensure that neither solid particles nor liquids can penetrate into the product.
►
Should the product come into contact with water, remove the batteries and allow the
►
product to air dry fully.
NOTICE
Mechanical stress on the product
Limited function due to product malfunction or damage.
Do not subject the product to mechanical vibrations or impacts.
►
Check the product for visible damage before each use.
►
NOTICE
Operating the product outside of the permissible temperature range
Limited function due to product malfunction or damage.
Avoid operation in areas outside the permissible temperature range (see page 17).
►
NOTICE
Connected electrodes prevent the automatic shut-down.
Limited function/prevention of automatic product shut-down by connected electrodes with open
measuring inputs.
Disconnect the electrodes after every use.
►
Turn the device off manually.
►
NOTICE
Operating near sources of strong magnetic or electrical interference (e.g. theft preven
tion systems, metal detectors)
Limited function due to product malfunction.
Avoid operating the product in the vicinity of sources of strong magnetic and electrical inter
►
ference (e.g. high-voltage lines, transmitters, transformer stations, computer tomographs,
magnetic resonance tomographs, etc.).
Use the product only in orthopaedic workshops, or during in-patient stays in rehabilitation
►
facilities.
NOTICE
Operating the product very close to other electronic devices
Limited function due to product malfunction.
Do not stack the product during operation nor operate it in the immediate vicinity of other
►
electronic devices in operation.
If simultaneous operation cannot be avoided, monitor the product and verify proper use in
►
the existing setup.
14
Advertisement
