Table of Contents
Advertisement
Environmental Specifications
Environmental Specifications
Table 9 Environmental specifications
Rated Temperature Range
Operating Temperature Range
Storage Temperature Range
Humidity: Operation/Storage
Ingress Protection Rating
a
Operation may be limited based on the battery chemistry. For example, Lithium Iron Phosphate
batteries have a limited charging temperature range. Follow specific battery manufacturer
recommendations for the applicable chemistry.
46
Freedom EX 4000
0–40 °C (32 –104 ºF)
a
-10 –60 ºC (14 –140 ºF),
with output derated
above 40 °C (104 ºF)
-40 –70 ºC (-40 –
158 ºF)
5–95% RH, non-
condensing
IP20
System Specifications
Table 10 System specifications
e
Transfer relay rating (A
)
Transfer time (milliseconds)
Shore to inverter:
Inverter to shore:
Transfer voltage (V)
Shore to inverter:
Inverter to shore:
Shore to inverter:
Inverter to shore:
Waveform
Peak Efficiency
Idle consumption
(DC-DC converter has no load. Remote
display, RV-C control, and BTS are
connected.)
Cooling
e
Circuit breakers shall not carry more than 80% of their UL current rating continuously.
Freedom EX 4000
40A (continuous)
50A (max)
<10 milliseconds
<10 milliseconds with a
20-second delay
Shore voltage less than
60V(min) - 80V(default)
- 115V (max)
Shore voltage greater
than above value + 2V
hysteresis
Shore voltage greater
than 125V(min) - 138V
(default) - 144V(max)
Shore voltage less than
above value – 2V
hysteresis
True Sine Wave
95.5 %
< 0.3 W
(Power button on
unit is Off (Standby))
< 8 W
(Power button on
unit is On, inverter mode
disabled, charger mode
enabled)
< 30 W
(Power button on
unit is On, inverter and
charger mode enabled)
Fan, activated by any of
the following:
High internal
n
temperature
High AC output
n
power
Freedom EX 4000 Installation Guide
Advertisement
Table of Contents
