Table of Contents
Advertisement
Basic Installation Procedures
ELECTRICAL SHOCK HAZARD
Use a torque screwdriver to tighten the captive nut panel
screw to 5 in-lb (0.56 N-m) torque of force to ensure a proper
ground connection and a required tool access to the wiring
compartment.
Failure to follow these instructions can result in death,
serious injury, or equipment damage.
12. Connect the other end of the wires to a circuit breaker in
AC distribution panel providing AC power to the loads.
For possible wiring configurations into the vehicle's (or
vessel's) output AC distribution panel, see the following
figures starting on page 23.
22
WARNING
Freedom EX 4000 Installation Guide
Advertisement
Table of Contents
