D Transmitting A Position Request Call - Icom IC-M92D Instruction Manual

D Transmitting a Position request call
Transmit a Position request call when you want to know a
specific ship's current position.
Enter "POSITION REQUEST" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU]) (Push [Y]/[Z], then push [ENT].)
Select the desired preprogrammed Position request ad-
w
dress or "Manual Input," using [Y]/[Z], then push [ENT].
• The ID code for the Position request call can be set first.
(p. 20)
• When "Manual Input" is selected, set the 8 digit ID code for the
group you wish to call.
➪ All Ships Call
About Manual Inputting:
Enter a desired address ID in the following way:
• Select the desired number usuing [Y]/[Z]/[Ω]/[≈].
• Push [ENT] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENT].
• The first digit is specified as '0' for a Group ID.
• The first two digits are '0' for any Coast station ID.
A confirmation screen appears.
e
• Confirm the call contents.
8
DSC OPERATION
☞ Continued on the next page.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
34