Otto Bock Genium Protector 4X880 Series Instructions For Use Manual page 11

2 Product description
2.1 Design
The product consists of the following components:
2.2 Function
The Protective Cover provides a means of enclosing the Genium electronic knee joint, including
the tube adapter, to enhance its appearance and function. The housing of the knee joint is protec­
ted against external influences by the Protective Cover, e.g. scratching and surface contamina­
tion. The Protective Cover is not required for the proper and safe functioning of the joint.
2.3 Combination possibilities
Prosthetic components that are suited for combination with the product are listed below.
Knee joints
• 3B1, 3B1=ST Genium
• 3B1-2, 3B1-2=ST Genium
• Genium: 3B1-3, 3B1-3=ST
Prosthetic feet
• 1A30 Greissinger plus
• 1C60 Triton
• 1C61 Triton Vertical Shock
• 1C63 Triton Low Profile
• 1C64 Triton Heavy Duty
• 1C30 Trias
• 1C40 C-Walk
• 1D35 Dynamic Motion
Protector foot cuff according to foot size
INFORMATION
The product "1B1=*/1B1-2=* Meridium" includes a connection plate that must be used for con­
necting the Protective Cover.
The connection plate is compatible with cuff sizes S and M. Cuff size M is equivalent to foot size
29 for the Meridium.
Foot size
Up to 25
26 to 28
From 29
1. Protective Cover main component
2. Upper closure
3. Lengthwise closure
4. Protector foot cuff for Protective Cover
• 1M10 Adjust
• 1E56 Axtion
• 1E57 Lo Rider
• Challenger: 1E95
• 1B1 Meridium
• Meridium: 1B1-2
• Empower: 1A1-1
• 1C10 Terion
Cuff size
S
M
L
11