Threshold Values For Wheelchairs Transportable By Train - Otto Bock Start M1 Instructions For Use Manual

Appendices
Additional information
Start M1
Total weight
Mass of the heaviest component [kg]
Overall length with footrests [mm]
Overall width [mm]
Length (folded) [mm]
Width (folded) [mm]
Height (folded) [mm]
Seat bottom angle [°]
Effective seat depth [mm]
Effective seat width [mm]
Front seat height [mm]
Rear seat height [mm]
Backrest angle [°]
Backrest height [mm]
Distance footrest to seat [mm]
Distance armrest to seat [mm]
Angle footrest to seat bottom [°]
Push ring diameter [mm]
Minimum turning radius [mm]
Positioning of the armrest [mm]
1)
In accordance with ISO 7176-5

10.2 Threshold values for wheelchairs transportable by train

INFORMATION
► The wheelchairs in this series fully satisfy the minimum technical requirements of regulation (EU)
No. 1300/2014 for wheelchairs transportable by train. However, not all versions can comply with all threshold
values due to different settings.
► With the help of the table that follows, you or the qualified personnel can take measurements and verify wheth­
er the concrete wheelchair meets the threshold values.
Feature
1)
Length [mm]
1)
Width [mm]
1)
Smallest wheels ["]
1)
Height [mm]
1)
Turning radius [mm]
1)
Maximum weight [kg]
Maximum obstacle height that can be overcome [mm]
Ground clearance [mm]
Maximum inclination angle on which the wheelchair will
1)
remain stable [°]
1)
Threshold value is always maintained with this type of wheelchair, see Page 29
30 | Ottobock
1)
Minimum
14.4
9.6
943
570
943
310
925
2
400
380
460
450
2
400
280
200
2
500
1)
767
290
Threshold value (according to regulation (EU)
No. 1300/2014)
1200 (plus 50 mm for the feet)
700 (plus 50 mm on each side for the hands when mov­
ing)
approx. 3 or greater (according to the regulation, the
smallest wheel must be able to accommodate a gap
measuring 75 mm horizontal and 50 mm vertical)
max. 1375 (including a 95th percentile male occupant)
1500
200 (for wheelchair and occupant, including any bag­
gage)
1)
50
60 (at an upward slope angle of 10°, ground clearance
must measure at least 60 mm under the foot rest for
going forward at the end of the slope)
6 (dynamic stability in all directions)
9 (static stability in all directions, including with wheel
lock engaged)
Maximum
15
10
1015
695
1015
---
975
---
420
505
510
500
---
425
500
220
32
530
1)
791
---
Start M1