Table of Contents
Advertisement
Notes
1.
Do not make any modifications to the device. To avoid personal injury or property damage please ensure your operation as followed as the Guide.
2.
Dress properly. Do not wear loose clothing or jewelry. Keeping your hair, clothing and gloves away from moving parts.
3.
Do not directly touch the nozzle and build plate to avoid high-temperature burn.
4.
Do not operate the Aquila in flammable liquid, gas or dust environment (The high temperature generated by Aquila operation may react with dust,
liquid, and flammable gas in the air to cause a fire.)
5.
Do not put the Aquila into the situation in which an unstable environment. The printer quality will be affected.
6.
Children and untrained personnel are not allowed to operate the Aquila alone.
7.
Operate the device in a well-ventilated environment. Some materials may produce odors during the printing process.
8.
Do not manually move the nozzle and printing platform mechanism while booting up, otherwise the device will be damaged.
9.
Never use the device for illegal activities.
10.
Never use the device to make any food storage vessels.
11.
Never put the model into your mouth.
12.
To lower the build plate before loading/unloading filament. The distance between the nozzle and build plate should be kept for at least 50mm.
13.
Keep the device with regular maintenance, to wipe with a dry cloth to remove dust and adhered printing items.
Please pay attention to the sharp edges and corners of the profile.
02
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Aquila and is the answer not in the manual?
Questions and answers
I have a Voxelab Aquila X2. My nozzle is hitting the bed before the limit switch can stop from hitting. How do I rectify the issue?
To fix the nozzle hitting the bed on a Voxelab Aquila X2 before the limit switch stops it, follow these steps:
1. Check the Z-Axis Limit Switch: Ensure the Z-axis limit switch is properly installed and positioned. If it is too low, adjust its position upwards so it triggers before the nozzle touches the bed.
2. Adjust the Bed Leveling Knobs: Turn the leveling knobs counterclockwise to lower the bed slightly, preventing the nozzle from hitting it too soon.
3. Use Auto Home Function: In the printer menu, select *Auto Home* to ensure the extruder moves to its correct home position.
4. Modify Z-Offset: If needed, adjust the Z-offset in the printer settings to fine-tune the nozzle height.
5. Check for Obstructions: Ensure there are no obstructions or loose parts affecting the movement of the Z-axis.
By following these steps, the nozzle should stop at the correct height before touching the bed.
This answer is automatically generated
I'm in search of a new extruder kit for my aquila S3, could you please tell me what I would need in order to replace the factory extruder