Performing An Auto Test - Wavetek Wandel Goltermann CLI-1450 Operation Manual

The ambient temperature at which the test is performed is
recorded. Your CLI-1450 contains an internal temperature
sensor for this purpose. If you prefer to use your own ther-
mometer, you can manually enter the temperature here.
Important
For scheduled tests, the manual temperature entry is used for
the first interval only. Subsequent intervals will record the
temperature as measured by the internal sensor. For accurate
measurements, your CLI-1450 reads the internal temperature
sensor immediately upon power-up.
When you are ready to begin the test, press the

PERFORMING AN AUTO TEST

PERFORMING AN AUTO TEST PERFORMING AN AUTO TEST
PERFORMING AN AUTO TEST PERFORMING AN AUTO TEST
The following screen appears when your CLI-1450 is performing
Auto Test measurements:
The number, type and carrier frequency of the channel currently
being measured is displayed. The bar graph indicates the percentage
of channels measured.
2-28
Temperature Temperature Temperature Temperature Temperature
soft key.