Checking Limits On An Individual Channel - Wavetek Wandel Goltermann CLI-1450 Operation Manual

When you have selected the limits submenu, the marker information
below the graph is replaced by the overall limit check summary for
channels currently being displayed on the graph. For each limit, the
worst case actual value is displayed along with a pass/fail status. The
results are updated upon the completion of each scan.
Important Important Important
Important Important
The limit check results apply only to the channels currently being
displayed on the graph — not the entire channel plan.
Note Note Note
Note Note
Only the limits that are enabled in the selected test point appear on
this screen.
Your CLI-1450 can indicate the minimum and maximum carrier level
limits on the graph. The out-of-limit portions appears as diagonal
"hash" areas. You can toggle the hash lines on and off by pressing the
key.
Note Note
Note Note Note
The limit check results are updated with each scan. They are also
updated immediately when you press the
When you are finished viewing the overall limit results, press the
soft key to return to the main menu.
CHECKING LIMITS ON AN INDIVIDUAL CHECKING LIMITS ON AN INDIVIDUAL CHECKING LIMITS ON AN INDIVIDUAL
CHECKING LIMITS ON AN INDIVIDUAL CHECKING LIMITS ON AN INDIVIDUAL
CHANNEL CHANNEL
CHANNEL CHANNEL CHANNEL
Indicators appear in the marker information area when a channel is
outside the limits of the currently selected test point.
2-18
or soft keys.