Table of Contents
Advertisement
The unit will complete the build and display the Build Channel Plan-
STEP 5 screen (shown right above).
Press the right softkey to return to the main Channel Plan menu
(page 1-26).
How to Edit the Channel Plan
How to Edit the Channel Plan
How to Edit the Channel Plan
How to Edit the Channel Plan
How to Edit the Channel Plan
Why edit the Channel Plan?
Why edit the Channel Plan?
Why edit the Channel Plan?
Why edit the Channel Plan?
Why edit the Channel Plan?
An accurate channel plan is essential for testing the cable system,
including limits for analog and digital carriers.
Editing is required to verify that the channel plan is built correctly
(has the right parameters).
From the Channel Plan screen (page 1-26), use the up/down arrow
keys to highlight EDIT CHANNEL PLAN, then press . This will
bring up the Edit Channel Plan screen.
The screen contains a list of all channels, their frequencies and
activation status (enabled channels carry a check mark under the ENA
column). To disable a channel, highlight the channel and then press
the left softkey.
To edit a channel's parameters, highlight that channel and then press
the center softkey. This will bring up the Edit Channel screen.
1-29
Advertisement
Table of Contents
