Getting Acquainted With The Keypad - Wavetek Wandel Goltermann CLI-1450 Operation Manual

StealthWare 3.0. Refer to page 1-21 for configuration instructions
and page 2-36 for operating instructions

GETTING ACQUAINTED WITH THE KEYPAD

The keypad consists of the following:
• three Soft keys
• a Power key
• four Mode Selection keys
• an Enter key
• eleven Alphanumeric keys
• a Shift key
1 . 1 . 1 . 1 . 1 . SOFT KEYS SOFT KEYS SOFT KEYS
SOFT KEYS SOFT KEYS
There are three horizontally oriented soft keys located below the
display. The function of each soft key changes depending on the
particular operation being performed and is represented by an icon
immediately above the key.
2 . 2 . 2 . 2 . 2 . POWER KEY - ON/OFF POWER KEY - ON/OFF
POWER KEY - ON/OFF POWER KEY - ON/OFF POWER KEY - ON/OFF
Turns your CLI-1450 on and off.
3. MODE SELECTION KEYS 3. MODE SELECTION KEYS 3. MODE SELECTION KEYS
3. MODE SELECTION KEYS 3. MODE SELECTION KEYS
INSTALLATION MODE INSTALLATION MODE INSTALLATION MODE INSTALLATION MODE INSTALLATION MODE
Easily check the channels that you have installed and
verify that they are within limits.
LEVEL MODE LEVEL MODE
LEVEL MODE LEVEL MODE LEVEL MODE
Measure the signal level at a specific channel or fre-
quency.
FULL SCAN MODE FULL SCAN MODE
FULL SCAN MODE FULL SCAN MODE FULL SCAN MODE
View a spectrum graph of all carrier levels in your channel
plan.
1-7