Table of Contents
Advertisement
MEASUREMENT HOLD
MEASUREMENT HOLD
MEASUREMENT HOLD
MEASUREMENT HOLD
MEASUREMENT HOLD
You can freeze the tilt measurement at any time by pressing the
SHIFT +
keys. The measurement is retained even if the cable is
disconnected from the input port. Notice that the mode icon in the
upper left-hand portion of the screen flashes when the measurement is
on hold. Press the SHIFT +
measurement is not retained when another mode is selected or the
CLI-1450 is shut off.
PRINTING THE SCREEN
PRINTING THE SCREEN
PRINTING THE SCREEN
PRINTING THE SCREEN
PRINTING THE SCREEN
You can print the entire screen at any time by pressing the SHIFT +
keys. A bar graph appears indicating the status of the printout.
STORING A TILT FILE
STORING A TILT FILE
STORING A TILT FILE
STORING A TILT FILE
STORING A TILT FILE
Press the SHIFT +
a file. A screen will appear asking you to enter a name for the file.
Once stored, you will be able to recall the file at a later time and view
it on the Tilt screen. You will be able to adjust the screen settings the
same as when you are viewing a "live" measurement. See the section
on VIEW mode to find out how to access files that you have stored.
SCAN
The CLI-1450 includes an additional SCAN mode that can display up
to six video carriers. You can access this mode by choosing the
icon from the NAVIGATOR.
2-22
keys again to release the hold. The
keys to store the current tilt measurement into
Advertisement
Table of Contents
