Wavetek Wandel Goltermann CLI-1450 Operation Manual page 22

Scanning signal level & leakage meter
Table of Contents

Advertisement

turn off automatically. The
and will remain on continuously. If you see no indicator, the back-
light is off.
TIME
TIME
TIME
TIME
TIME
Sets the time for the internal real-time clock. The time is set, dis-
played and printed in 24 hour format only (HH:MM:SS).
DATE FORMAT
DATE FORMAT
DATE FORMAT
DATE FORMAT
DATE FORMAT
You can specify the format in which the date is displayed and printed.
Select between the following formats:
DATE
DATE
DATE
DATE
DATE
Sets the date for the internal real-time clock. You can specify the
format in which the date is set, displayed and printed (see DATE
FORMAT).
PRINTER
PRINTER
PRINTER
PRINTER
PRINTER
Select the manufacturer of the printer that you will be using. A printer
with a serial interface is required. Set your printer configuration as
follows:
Important
Important
Important
Important
Important
The baud rate of both your CLI-1450 and your printer must match
(see BAUD RATE).
Tip
Tip
Tip
Tip
Tip
A serial to parallel converter (such as the one manufactured by Black
Box Corp.) can be used for printing to a parallel printer.
indicator means that the backlight is on
MM/DD/YY
DD.MM.YY
YY.MM.DD
Baud Rate:
Date Bits:
Stop Bits:
Parity:
Flow Control:
same as your CLI-1450
8
1
NONE
Xon/Xoff
1-15

Advertisement

Table of Contents
loading

Table of Contents