Table of Contents
Advertisement
INTRODUCTION
The best way to learn about the CLI-1450 is to use it. Section 2
discusses the individual measurements available with the CLI-1450.
Each measurement mode discussion includes detailed descriptions
on how to perform the measurement as well as operating controls and
indicators.
LEAKAGE
The CLI-1450 has two sub-modes of operation that detect and
measure RF leakage: the Measure mode and the Find and Fix mode.
The Measure mode is used to obtain the most accurate leakage
measurements. The Find and Fix mode is optimized for locating the
source of RF leaks. See the Searching for a Leak section (p. 2-5) for a
complete description of the Find and Fix mode.
To detect and measure RF leakage, press the SHIFT +
choose the
icon from the NAVIGATOR screen. The LEAKAGE
screen will default to the last sub-mode entered. If the CLI-1450
defaults to the Find and Fix mode, press the
Measure mode.
MODEL CLI-1450
2
Using
the CLI-1450
key or
soft key to the
2-1
Advertisement
Table of Contents
