Checking Limits - Wavetek Wandel Goltermann CLI-1450 Operation Manual

to zoom in and the
factor is displayed above the graph. Press the
have finished.

CHECKING LIMITS

CHECKING LIMITS CHECKING LIMITS CHECKING LIMITS CHECKING LIMITS
You can verify that the carrier levels are within limits. First, you need
to tell your CLI-1450 which test point you are at. This determines
which set of limits are used.
Press the soft key to access the limits submenu. A new set of soft
keys appear.
Press the soft key to sequence through the available test points.
The test point that you have selected is represented in the upper
portion of the screen by one of the following icons:
Note Note
Note Note Note
Be sure that you have enabled all of the test points that you are
interested in using. The
than one enabled test point. (see EDIT TEST POINTS).
soft key to zoom out. The magnification
Subscriber Drop
Ground Block
Tap
User Defined
soft key is only available if there is more
soft key when you
2-17