Table of Contents
Advertisement
THE PASS/FAIL INDICATOR
THE PASS/FAIL INDICATOR
THE PASS/FAIL INDICATOR
THE PASS/FAIL INDICATOR
THE PASS/FAIL INDICATOR
Use the PASS/FAIL indicator located directly above the channel list
to quickly determine whether the highlighted channel has passed the
limits check. If the channel failed, you can identify the reason(s) for
the failure by looking at the symbols that appear in this indicator.
CHANNEL MEASUREMENT
CHANNEL MEASUREMENT
CHANNEL MEASUREMENT
CHANNEL MEASUREMENT
CHANNEL MEASUREMENT
Press the
soft key or
ment screen.
Adjacent Channel Failures
lower adjacent channel level
upper adjacent channel level
both upper and lower adjacent channel
levels
Video Level Failures
video level too high
video level too low
DVA Failures
DVA too high
DVA too low
to sequence to the channel measure-
2-11
Advertisement
Table of Contents
