Wavetek Wandel Goltermann CLI-1450 Operation Manual page 69

list. Press the
and continue to the next step.
Tip
If you are not interested in logging the information, select
NONE from the list. Your CLI-1450 will present you with
only the steps required to configure the test.
Tip
You can rename the location highlighted in the directory by
pressing the SHIFT +
you to enter a new name.
This screen is where you enter the information for a new or
existing location. Use the up and down arrows to select the
item to be edited. The items that appear in the list depend
on the type of location you have selected. If you regularly
perform tests at this location, you can save it for future use so
that you only need to enter the information once. To do this,
press the
When you are done editing, press
the Auto Test.
Note Note Note
Note Note
Your CLI-1450 will remind you when you have not stored the
location. You should only do this, however, if you think you
will return for another test.
Some location types have multiple points at which you can
make test measurements. If you have selected such a type,
this screen will appear. Use the up and down arrows to
choose the appropriate probe point from the list and then
press the
2-26
soft key to select the highlighted location
New/Edit Location New/Edit Location New/Edit Location New/Edit Location New/Edit Location
soft key and enter a name for the location.
Choose Probe Point Choose Probe Point
Choose Probe Point Choose Probe Point Choose Probe Point
soft key.
keys. A screen will appear asking
to continue configuring